How To Make A Bootable Pendrive For Windows XP- You can make a bootable pendrive for windows XP easily and it’s fully works. I still can remember about a friend who asked me for repairing her Windows that is her CD ROM Drive was not working properly so in this case I did not boot from the bootable CD of Windows XP. Rather than, I thought copying file from CD to a pen drive and I did boot from the USB pen drive. Nevertheless how can I boot from the pen drive, as a pen drive was not bootable itself. The story was an old one of a few months ago.
However, if my friend comes to me again for solving the trouble, I will be very happy, as I identify how to make an USB drive bootable. It is a freeware program for making a pen drive bootable media by giving a single click thus it makes a pen drive bootable not deleting any files from your USB device.
It does not require any installation and contains an executable data. For using Make Bootable, select the pendrive that you like to boot. Click “Make Bootable” for running the process. The application will load a few files requiring booting up your USB drive.
After that you might need to modify the boot up location of the BIOS during plugging your device, you need to restart the system. Enter keen on BIOS system menu, and then you should change your boot device setting. Next, select USB drive. If you see the boot up data is formed in the USB tool, then select USB HDD/ USB ZIP. But you notice the boot up file is created into the floppy disk then select USB FDD.
If it once done and saved then exit BIOS setup and after that you enable to boot up by your USB drive.
Now, you can Make Bootable active accurately on the Windows XP, 98, 2000 and ME,
Note: You need to turn the configure to FAT before running your Make Bootable if the USB drive is under NTFS and FAT32 file format as Make Bootable does not support NTFS and FAT32 file system.
However, if my friend comes to me again for solving the trouble, I will be very happy, as I identify how to make an USB drive bootable. It is a freeware program for making a pen drive bootable media by giving a single click thus it makes a pen drive bootable not deleting any files from your USB device.
It does not require any installation and contains an executable data. For using Make Bootable, select the pendrive that you like to boot. Click “Make Bootable” for running the process. The application will load a few files requiring booting up your USB drive.
After that you might need to modify the boot up location of the BIOS during plugging your device, you need to restart the system. Enter keen on BIOS system menu, and then you should change your boot device setting. Next, select USB drive. If you see the boot up data is formed in the USB tool, then select USB HDD/ USB ZIP. But you notice the boot up file is created into the floppy disk then select USB FDD.
If it once done and saved then exit BIOS setup and after that you enable to boot up by your USB drive.
Now, you can Make Bootable active accurately on the Windows XP, 98, 2000 and ME,
Note: You need to turn the configure to FAT before running your Make Bootable if the USB drive is under NTFS and FAT32 file format as Make Bootable does not support NTFS and FAT32 file system.
No comments:
Post a Comment